GD30K2-12 type axial fan
- 共 0頁0條記錄
Product description
The GD30K2-12 axial fan can be connected as a part of the pipe to the middle of the pipeline for chemical, paper and other plants to deliver air below 60 ° C and various gases harmful to the motor.
The fan according to its impeller diameter are divided: No.6, 7, 8, 9, 10 and other five machine number. There are four leaves, six two. Blade installation angle can be made 15 °, 20 °, 25 °, 30 ° 4 kinds.
The motor is mounted on the upper part of the hairdryer with adjustable motor base plate to support the motor and to adjust the center distance. All with V belt drive. The bearing housing is secured to the media in a protective cylinder sealed in the center of the hairdryer.
Features
(1) The motor is installed in the upper part of the hairdryer, and the V-belt drive can adjust the center distance. The transmission group is fixed in the sealing cylinder in the center of the hairdryer and can be separated from the medium, so it can convey the humid gas and the gas which is harmful to the motor.
(2) can be used to change the number of revolutions, to change the flow, the purpose of wind pressure. If you need to transport corrosive, explosive gas, can be made when ordering requirements.
The GD30K2-12 axial fan can be connected as a part of the pipe to the middle of the pipeline for chemical, paper and other plants to deliver air below 60 ° C and various gases harmful to the motor.
The fan according to its impeller diameter are divided: No.6, 7, 8, 9, 10 and other five machine number. There are four leaves, six two. Blade installation angle can be made 15 °, 20 °, 25 °, 30 ° 4 kinds.
The motor is mounted on the upper part of the hairdryer with adjustable motor base plate to support the motor and to adjust the center distance. All with V belt drive. The bearing housing is secured to the media in a protective cylinder sealed in the center of the hairdryer.
Features
(1) The motor is installed in the upper part of the hairdryer, and the V-belt drive can adjust the center distance. The transmission group is fixed in the sealing cylinder in the center of the hairdryer and can be separated from the medium, so it can convey the humid gas and the gas which is harmful to the motor.
(2) can be used to change the number of revolutions, to change the flow, the purpose of wind pressure. If you need to transport corrosive, explosive gas, can be made when ordering requirements.